Grade 3 Titanium Plate
video

Grade 3 Titanium Plate

Grade:Grade 3
Material:CP Ti
Standard:ASTM B265/ASME SB-265
Condition: Annealed
Thickness: 0.5-60mm Width: 1000mm Length: 2000mm
(custom tailor-made available)
Send Inquiry

Description

Technical Parameters

Introduction

 

Grade 3 titanium is a pure (CP) titanium grade.Gr3 titanium plates has an optimal balance of strength, corrosion resistance, and processability for demanding industrial applications. Gr3 titanium is commercially pure titanium (CP Ti, UNS R50550), unalloyed, higher strength than Gr1 & Gr2, lower ductility. It is widely supplied as titanium plate / sheet / coil.Gr3 is NOT for medical implant use. It focuses on industrial corrosion service.

 

Ruihang, as a direct manufacturer of titanium alloy products, supply premium titanium plates with the complete production chain. The varies of titanium alloy products can offer to our customers' specific requirements.

 

Mechanical Properties

 

Property

Minimum

Tensile Strength

450 MPa

Yield Strength

380 MPa

Elongation

18%

Hardness

-

Reduction of Area

40%

 

Chemical Composition

 

Element

Max

Ti

Balance

Fe

0.30 %

C

0.10 %

N

0.05 %

H

0.015 %

O

0.35 %

Manufacturing & Processing

1.

Raw material preparation

  • Raw material: Titanium sponge
  • Alloying: Grade 3 is unalloyed pure titanium; only controlled trace impurities (Fe, O, C, N, H) are strictly limited. Oxygen content is higher than Grade 2 to achieve higher strength.
  • Compaction: Titanium sponge is pressed into compact briquettes.
 
2.

Vacuum arc remelting (VAR)

Briquettes are welded into consumable electrodes.

  • Melting is performed in a vacuum furnace to avoid oxidation and nitrogen absorption.
  • Typically double VAR melting to homogenize chemical composition and eliminate porosity, segregation and inclusions.
  • Output: Titanium ingot.
 
3.

Ingot conditioning

  • Surface grinding / turning to remove surface cracks, scale and contaminated layers.
  • Inspection for surface and internal defects.
 
4.

Hot forging / blooming

  • Heat the ingot to the forging temperature range of pure titanium (~850–1050 °C).
  • Forge the ingot into slab / billet, breaking the coarse cast grain structure.
  • Cut to specified slab dimensions.
  • Surface conditioning again to remove forging scale and surface flaws.
 
5.

Hot rolling

  • Reheat the titanium slab.
  • Multi-pass hot rolling to reduce thickness and produce hot rolled plate / coil.
  • Hot rolling refines grains and improves mechanical uniformity.
  • After hot rolling: descaling by sandblasting + acid pickling (HF+HNO₃ mixed acid) to remove oxide layer.
 
6.

Cold rolling (for thin plates / sheets)

  • For thinner gauge Grade 3 titanium plates, cold rolling is applied after hot rolling and pickling.
  • Cold rolling improves surface finish and dimensional tolerance.
  • Intermediate vacuum annealing is required to relieve work hardening.
 
7.

Heat treatment

  • Stress relief annealing: Remove residual rolling stress, typically 480–600 °C, air or furnace cool.
  • Full vacuum annealing: For fully soft state, ~700–780 °C under vacuum. Prevent surface oxidation.
  • Grade 3 titanium plates are normally supplied in annealed condition for stable mechanical properties.
 
8.

Cutting & finishing

  • Cut to customer required sizes by shearing, plasma cutting or band sawing.
  • Edge trimming, deburring.
  • Surface treatment: pickling, light grinding or polishing as requested.
 
9.

Quality inspection & testing

  • Chemical composition analysis
  • Mechanical test: tensile strength, yield strength, elongation
  • Non-destructive testing: ultrasonic test (UT) for internal defects
  • Visual inspection, dimensional check
  • Material certification (MTC) issued complying with ASTM B265 (standard specification for titanium and titanium alloy strip, sheet, and plate)
 
10

Packaging & delivery

Pack to avoid scratching and contamination, mark heat number, grade, dimensions.

 

 

Applications

 

Industry

Typical Uses

Chemical

Pressure vessels, heat exchangers, reaction vessels, piping, valve components

Marine

Hull components, seawater desalination equipment, offshore structures, propeller shafts

Aerospace

Airframe structures, engine components, hydraulic systems, fasteners

Medical

Orthopedic implants, surgical instruments, dental fixtures

General

Corrosion-resistant equipment, cryogenic vessels, heat treating baskets

Oil & Gas

Downhole tools, wellhead components, subsea systems

 

Company Advantages

 

RUIHANG
 

1.Production Equipment & Capacity

 

 

  • Mills: 550mt, 450mt, 350mt (1 set each); plus 9 resistance furnaces, 2 annealing furnaces, 2 skew roll straightening machines
  • Monthly capacity for titanium bars: 500 metric tons

 2.Location Advantage & Service

 

 

  • Based in Baoji ("China's Titanium Valley") with concentrated titanium industry and complete industrial chain
  • Competitive price & reliable after-sales service guaranteed by industrial cluster advantage, high production efficiency and yield rate

 

3.Quality Assurance

 
  • Certified with EN ISO 9001:2015 & EN 9100:2018 by French BV in 2025
  • In-house testing center with advanced instruments
  • Strict quality control ensures all products meet customer requirements

 

high-quality Assurance

 

Professional Team

 

1.The Inspection Room In-House:Our Technology Center has advanced Testing Equipments, include O/N/H Analysis Meter, Tensile Testing Machine, Metallurgical Phase Microscope, Hardness Tester, Ultrasonic Flaw Detector,Eddy Current Flaw Detector.

2. The Third-Party Testing Center:The third-party testing is available upon request. The full testing certificates are well supllied.

Team
inspection machines

FAQ About Grade 3 Titanium Plate 

 

What mechanical properties can Grade 3 titanium plate achieve?

In annealed condition, typical minimum tensile strength: 345 MPa; minimum yield strength: 275 MPa. Elongation is lower than Grade 2 due to higher strength. All mechanical values are verified per ASTM B265.

 

What surface finishes are available?

Pickled surface (standard), ground surface, polished surface. Pickled finish removes oxide scale and is the most common option for industrial use. Custom surface treatments are acceptable upon request.

 

Can you supply full material test certificates?

A6: Yes. A full set of material test certificates (MTC) will be provided, covering chemical composition, mechanical properties and ultrasonic test results.

 

Hot Tags: Grade 3 Titanium Plate, China Grade 3 Titanium Plate manufacturers, suppliers, factory, Gr4 Titanium Plate, titanium plates, Gr2 Titanium Plate, Gr1 Titanium Plate, Gr3 Titanium Plate, pure titanium plates

Send Inquiry